Fixed Truss Trailer

28', 36', 40', 44', 48', or 53' ground level roll-off trailers, flat, slant, or drop profile and hydraulic lift neck.
Old Model NumberNew Model NumberLengthWidthWeight (+/- 3%)
BF-28TTR002828'102"10,940 LBS
BF-36TTR003636'102"12,180 LBS
BF-40 (Air Ride)TTR0040A40'102"13,435 LBS
BF-44TTR004444'102"14,300 LBS
BF-48TTR004848'102"15,600 LBS
BF-53TTR005353'102"16,800 LBS

Standard Features on All Models

  • Galvanized Head Board
  • Galvanized Single Piece Hydraulic Neck
  • Galvanized Deck Plate
  • Galvanized Deck Rollers
  • Galvanized Ground Rollers
  • Galvanized ICC Bumper
  • Aluminum Tool Box with Hydraulic Pump and Motor
  • Galvanized Extended Frame with Chains
Main Beam
ASTM A514 (130 Ksi) Flange, 3/8" x 6" top and bottom. Web 7ga., 12" deep over coupler, 18" deep in main section.
Cross Member
4" Structural Jr. I-beam, A656 80 Ksi on 12" centers
20" pin setting, 50 Ksi 3/4" hinged coupler plate on hydraulic arm with 55" stroke
Hoist Package
(2) 4" x 30" double acting cylinders. 12-volt DC motor/Piston pumps @ 25,000 psi, 1000 cold cranking amp deep battery with 6 Ga. Charge wire using a single post female plug
Side Rails
6-3/4" x 1-4" formed channel ASTM A572 Grade 50
Landing Gear
2-speed gear with longitudinal and transverse bracing
Deck Rollers
6" x 3/16" x 99-1/8", A-512 type II tube, 1-1/4" axles on 4 bolt flange bearings tapped for install. Rear deck rollers 24" centers and air actuated unlock device. Front deck rollers 36" centers and manual actuated unblock device. Heavy-duty rear roller, 6" diameter 1/4" thick wall, 1-1/2" axle on bronze bushings.
Ground Rollers
(2) 14" x 1/4" wall, 1-1/2" axles on heavy duty bronze bushings.
14 gauge thread plate safety-walking floor
44,000 LBS Hutch H-9700 spring tandem
Slide Box
Hutch H-9000 in frame special roller flat off road package. Air unblock device. 48s model uses special slanted version.
Safety Bumper
Hinged rear safety bumper, air actuated. Meets DOT collision requirements.
(2) 5" round, 22,500 LBS rating, 49" center, automatic slack adjusters, IS-2M anti-lock brake system.
16-1/2" x 7" air brakes, non-asbestos with outboard drums
10-hole disc, hub piloted
255/70R/22.5 radial
Quantity varies based on model
68,000 LBS
  • Tandem Axle Air Ride
  • Half Length Load Control (Fully Galvanized)
  • Full Length Load Control (Fully Galvanized)
  • Aluminum Tool Box
  • Center Tie Downs, Each
  • Hubdometer
  • Flag Holders - 4 pipes, holed & welded inside the beam (2 front / 2 back)
  • Flag Holders (Retractable) - 4 Galvanized holders (2 front / 2 back)
  • LED Light Upgrades
  • Dust Shields
  • Controllable Rollers On the back 30' trailer to control speed of load after unlocking rollers
  • S15000 12V Electric Winch
  • Sliding Ratchet Track (6pcs of 6FT Sections for the entire trailer)
  • 5" Outside Rails
  • 5" Bore Hydraulic Cylinders
  • TIRES: 11R22.5 Radial Tire Upgrade 14 ply or 295/75R22.5 Radial Tire Upgrade 14 ply
  • Aluminum Wheels, 8.25x22.5 (Tandem-Axle)
  • Aluminum Decking (Saving of 367 Lbs)
  • Solar Battery Saver
  • Additional Weld on Ratchet
  • Split Bed Rollers
  • 4-way plug on C/S for strobe lights
  • Tow-Bar at the rear of the trailer for Pulling
  • D-Rings (2) at the rear of the trailer for Pulling

Request Info on Fixed Truss Trailer

1-800-546-7728 or 1-269-465-7676

First Name

Last Name

Phone Number




Submit Warranty Registration

Personal Information

First Name

Last Name









Product Information

Model Number

Serial Number


Date of Manufacture

Date of Delivery